Turning On or Off Camera Lights, Sounds, and Vibrations (Stealth Mode)

For some situations, you may wish to turn off the LED lights, sounds (audio prompts), and vibrations (haptic feedback) on your Axon camera. Turning off all the indicators and notifications is also known as stealth mode.

If allowed by your agency, there are several ways you can enter and exit stealth mode. You can use the Battery Status button, Axon View (if your camera is paired with Axon View), Evidence.com Device Settings, or Evidence Sync software. Check with you Evidence.com administrator to learn which configuration settings you can change.

Additionally, if allowed by your agency, you can change the LED lights, audio prompt volume, or vibration settings separately using Evidence.com, Evidence Sync, or Axon View.

To turn the lights off using the Battery Status button:

• Press and hold the Battery button for 10 seconds.

To turn the lights on using the Battery Status button:

• Press and hold the Battery button for 10 seconds.

Entering and Exiting Stealth Mode using Axon View:

1. Ensure your Axon camera is turned on and paired with your mobile device.
2. Open the Axon View app on your mobile device.
3. Tap (Settings icon) in the upper-left side of the screen to go to the Settings. 
4. Under the Camera section, tap the switch to the right of the Stealth Mode to change the setting.
   If the switch is toggled to the right, stealth mode on the camera is enabled: the camera will not beep or vibrate, regardless of other settings, and all camera lights are off.
   If the switch is toggled to the left, stealth mode on the camera is disabled: the camera beeps and vibrates according to other, individual settings. Camera lights operate normally.

Turning On or Off Stealth Mode using Evidence.com:

Note: You must have Device Administration permission to manage your device settings in Evidence. com. If you do not have Device Administration permission, contact your administrator for information on changing settings for your camera.

1. Sign in to your Evidence.com account.
2. In the menu bar, click Devices and then My Devices.
3. Click on the Serial Number for your camera.
4. On the Device Profile page, click the Settings tab.
5. Select the On or Off setting, as appropriate, for Stealth.
6. Click Save Settings. The updated settings will take effect the next time the camera is docked.

Turning On or Off Stealth Mode using Evidence Sync:

1. Connect your camera to the Evidence Sync application.
2. Sign in to Evidence Sync.
3. Select the Device Settings tab.
4. Select the On or Off setting, as appropriate for Stealth Mode.
   The Operation LED flashes red, yellow, and then green before shutting down the lights.
   Pressing the Battery button will momentarily light both the Operation LED and the Battery LED, displaying the current operating mode and battery level.
5. Save the setting change.