The Axon Body 2 camera emits beeping sounds called “audio prompts” to notify you of the system status. These audio prompts usually occur after you perform an action with the body camera. These audio prompts are accompanied by a vibration that matches the beeps.
| Operating Mode | Audio Notification | Haptic Notification (Vibration) |
|---|---|---|
| Powering on or off | One beep | Once |
| Recording an event | Two beeps (every two minutes) | Twice (every two minutes) |
| Press the battery button while the camera is recording | Two beeps | None |
| The device is ending an event and returning to BUFFERING mode | One long beep | Once, long-duration |
| The battery is at 20 percent capacity or lower | Four quick beeps (every five minutes) | Four times, quickly (every five minutes) |
| The camera memory is full. The camera will not start recording. | Three beeps | Three times |
| The camera internal clock is not set. Place in an Axon Dock or connect to Evidence Sync to correct this issue. | Five beeps (every 20 seconds) | Five times (every 20 seconds) |