For some situations, you may wish to turn off the lights on your controller.
- Press and hold the Battery button for 10 seconds.
- The Operation LED flashes red, yellow, and then green before shutting down the lights.
- Pressing the Battery button will momentarily light both the Operation LED and the Battery LED, displaying the current operating mode and battery level. For interpreting the LED colors, see Recording an Event and Checking Battery Status.
- To turn the lights back on, press and hold the Battery button for 10 seconds.
Note: If you disconnect a cable when the lights are active, the Operation LED flashes yellow. If you turned off the LEDs, and you later disconnect a cable, there will be no visual warning that the cable has been disconnected.