Evidence Sync filtering tools enable you to reduce the information displayed onscreen. This helps if you need to find specific date and time records.
Filtering CEW Logs
Note: This procedure shows the online mode and includes the login steps. Except login, the steps will be the same in offline and MDT modes.
- Confirm that the CEW’s safety is in the down (SAFE) position.
- Remove the cartridges from the CEW. (See the applicable CEW user manual for more information on unloading cartridges.)
- Connect the CEW to your computer with the USB download cable.
- Click Start and select All Programs.
- Click SYNC and select SYNC.
- Type your login information and click Login.
See Figure 98–Figure 101 for different ways to filter records.
- Select your start time, start date, end time, end date, and event type.
Evidence Sync allows you to quickly specify the month (Figure 102) and year (Figure 103). You do not have to scroll through multiple months.
- Filter the events as needed.
- Click the ON button to turn the filters on.
- The information displayed is narrowed to your requirements. In Figure 104, the information displayed is within a specified date and time range, and only armed events are shown (USB events are hidden from view).
Filtering TASER CAM Videos
Note: This procedure shows the online mode and includes the login steps. Except login, the steps will be the same in offline and MDT modes.
- Confirm that the CEW’s safety is in the down (SAFE) position.
DO NOT shift the CEW’s safety switch to the up (ARMED) position while the TASER CAM recorder is connected to the computer.
- Remove the cartridges from the CEW. (See the applicable CEW user manual for more information on unloading cartridges.)
- Connect the CEW to your computer with the USB download cable.
The LED status indicator on the TASER CAM or TASER CAM HD recorder will flash green, then red.
If you are using a TASER CAM recorder with an X26 CEW, a “U” is displayed on the CID when the TASER CAM recorder is plugged into a computer. While the recorder is plugged into the computer, the CID will display the battery percentage, followed by a letter U, and then a blank screen.
- Click Start and select All Programs.
- Click SYNC and select SYNC.
- Type your login information and click Login.
- Click the recorder to select it.
Figure 105–Figure 108 display TASER CAM records and the options for filtering.
- Select your start time, start date, end time, end date, and event type.
Evidence Sync allows you to quickly specify the month (Figure 109) and year (Figure 110). You do not have to scroll through multiple months.
- From the Status menu, use the drop-down to select whether to display all videos, videos that are on the device (On device) or videos that have been transferred (Complete) (Figure 111).
- Click the ON button to turn the filter on.
The information displayed is narrowed to your requirements. In Figure 112, the information displayed is within a specified date and time range.
- Keep the recorder connected to the computer during this procedure.
- After you are done looking at the records, unplug the cable from the recorder. After unplugging the cable from the recorder, remember to replace the dataport plug on the recorder to prevent damage from any debris or moisture.
Filtering Axon Videos
Note: This procedure shows the online mode and includes the login steps. Except login, the steps will be the same in offline and MDT modes.
- Connect the camera to your computer with the 2.5 mm to USB cable.
- Click Start and select All Programs.
- Click SYNC and select SYNC.
- Type your login information and click Login.
Figure 113–Figure 116 Display Axon video logs and options for filtering them.
- Select your start time, start date, end time, and end date.
Evidence Sync allows you to quickly specify the month (Figure 117) and year (Figure 118). You do not have to scroll through multiple months.
- From the Status menu, use the drop-down to select whether to display videos that are on the device (On device) or videos that have been transferred (Complete) or all of them (Figure 119).
- Click the ON button to turn the filters on.
The information is narrowed to your requirements (Figure 120).
Sorting Axon Videos
This is a different process than that described in Filtering Axon Videos. Filtering excludes videos from the view based on criteria. Sorting videos places them in order.
Note: This procedure shows the online mode and includes the login steps. Except login, the steps will be the same in offline and MDT modes.
- Connect the camera to your computer with the 2.5 mm to USB cable.
- Click Start and select All Programs.
- Click SYNC and select SYNC.
- Type your login information and click Login.
- Click the button next to Sort by
and use the drop-down to select your criteria (Figure 121).