Previewing videos

Previewing TASER CAM Videos with Evidence Sync Software (Online)

You can preview videos before uploading them.

1. Confirm that the CEW’s safety is in the down (SAFE) position.

   DO NOT shift the CEW’s safety switch to the up (ARMED) position while the TASER CAM recorder is connected to the computer.

2. Remove the cartridges from the CEW. (See the applicable CEW user manual for more information on unloading cartridges.)
3. Connect the recorder to your computer with the USB download cable.

   The LED status indicator on the TASER CAM or TASER CAM HD recorder will flash green, then red.

   If you are using a TASER CAM recorder with an X26 CEW, a “U” is displayed on the CID when the TASER CAM recorder is plugged into a computer. While the recorder is plugged into the computer, the CID will display the battery percentage, followed by a letter U, and then a blank screen.

4. Click Start and select All Programs.
5. Click SYNC and select SYNC.
6. Type your login information and click Sign in (Figure 21).

   

7. Click the recorder so it is selected (Figure 22).

   

8. Click the title of the video you want to view.
9. Click the Click here to play button (Figure 23).

   

10. Click the Play button  and watch the video (Figure 24).

    

    If you want, you can upload the video to Evidence.com by clicking the Upload button and going to step 11. For further instructions on uploading videos, see Uploading Videos to Evidence.com and Categorizing Video Evidence.

11. Keep the recorder connected to the computer during the upload process.
12. After the uploads are completed, unplug the cable from the recorder. After unplugging the cable from the recorder, remember to replace the dataport plug on the recorder to prevent damage from any debris or moisture.

Previewing TASER CAM Videos with Evidence Sync (Offline)

You can preview videos before downloading them.

1. Confirm that the CEW’s safety is in the down (SAFE) position.

   DO NOT shift the CEW’s safety switch to the up (ARMED) position while the TASER CAM recorder is connected to the computer.

2. Remove the cartridges from the CEW. (See the applicable CEW user manual for more information on unloading cartridges.)
3. Connect the recorder to your computer with the USB download cable.
4. Click Start and select All Programs.
5. Click SYNC and select SYNC.
6. Click SYNC, select Mode, and then select Offline (Figure 33).

   

7. Click the TASER CAM recorder so it is selected (Figure 34).

   

8. Click the title of a video you want to watch (Figure 35).
9. Click the Click here to play button.

   

10. Click the Play button  (Figure 36).

    

11. Keep the recorder connected to the computer during the playback process. After you are done, unplug the cable from the recorder. After unplugging the cable from the recorder, remember to replace the dataport plug on the recorder to prevent damage from any debris or moisture.

Previewing Axon Videos with Evidence Sync (Online)

1. Connect the camera to your computer with the 2.5 mm to USB cable.
2. Click Start and select All Programs.
3. Click SYNC and select SYNC.
4. Type your login information and click Sign in.

   

5. Double-click the video you want to watch (Figure 45).

   

6. Click the Play button  and watch the video.

   

Previewing Axon Videos with Evidence Sync (Offline)

1. Connect the camera to your computer with the 2.5 mm to USB download cable.
2. Click Start and select All Programs.
3. Click SYNC and select SYNC.
4. Click SYNC, select Mode, and then select Offline (Figure 52).

   

5. Click the title of the video you want to watch (Figure 53).
6. Click the Click here to play button.

   

7. Click the Play button  (Figure 54).