When the safety switch is in the up (ARMED) position, the CID will display the percentage of battery power remaining. Remaining capacity will display in 20 percent increments.
When the battery level drops to 20 percent, Axon recommends that the battery pack be replaced.
 |
|
 |
When the battery capacity is at 1–10 percent, the CID will flash the warning LO BATT on the CID when the safety switch is cycled to the up (ARMED) position when using any PPM type. The LO BATT warning will be displayed when the battery capacity is between 1–40 percent for the TASER CAM HD. |
 |
If the battery capacity is at 1–20 percent, this icon displays in the lower-right portion the CID. |
 |
When the TASER CAM HD battery is depleted, the CID will flash the warning RECHARGE BATTERY on the CID when the safety switch is cycled to the up (ARMED) position. |
 |
When using any PPM-type battery pack that is depleted, the CID will flash the warning CHANGE BATTERY on the CID when the safety switch is cycled to the up (ARMED) position. |