If your X26 ECD is dropped or gets wet, follow these instructions:
- Point the ECD in a safe direction and away from your body.
- Shift the safety switch to the down (SAFE) position.
- Safely remove the cartridge.
- Remove the battery pack.
Dry the X26 thoroughly (at least 24 hours). Do not use an external heat source such as a microwave oven or hair dryer to dry the X26 ECD.
- Reinstall the battery pack.
- Shift the safety switch to the up (ARMED) position.
- If the X26 ECD discharges without pulling the trigger, remove the battery pack and return the X26 ECD to Axon immediately.
- Spark test three full 5-second cycles.
- If the X26 ECD does not function properly, return it to Axon.
- If the spark test is normal, return the X26 ECD to service.
- Shift the safety switch to the down (SAFE) position.